Ihse Draco tera 480 Series - Extended Switching

Operation
2020-02-26 211
6.3 Extended Switching
You have the following options to perform switching operation with the
Draco tera:
OSD
To switch any console to any available CPU, proceed as follows:
➔ Select Extended Switch in the main menu.
Pressing <F8> hides inactive CPU Devices to provide a clearer overview.
Menu Extended Switch
1. Select in the CON Devices list on the left hand side that one that
should be switched to a CPU Device and open it by pressing <Enter>.
2. Select in the CPU Devices list on the left hand side that one that
should be connected to the open CON Device.