Why won't my Ihse Draco tera K480-80C start?
If the Ihse Matrix Switcher cannot be started, first check if the power supply cables are connected correctly. Also, verify that the power supply units are switched on.
What to do if Ihse Matrix Switcher fans do not run, LED OK off?
If the fans of your Ihse Matrix Switcher are not running and the LED is off, check the power supply and power connection.
How to fix incorrect video display on Ihse Draco tera K480-80C Matrix Switcher?
If you're experiencing an incorrect video display with your Ihse Matrix Switcher, check the connection, length, and quality of the interconnect cable to the units.
What to do if Ihse Draco tera K480-80C cannot be started anymore?
If the Ihse Matrix Switcher cannot be started anymore, check the fuse at the standard appliance outlet.
Why is serial control via RJ45 port not possible on my Ihse Draco tera K480-80C?
If serial control via the RJ45 port is not possible on your Ihse Matrix Switcher, use a crossed network cable.
What to do if network settings are not assumed after editing on Ihse Matrix Switcher?
If network settings are not assumed after editing on your Ihse Matrix Switcher, restart the matrix.
What to do if port definitions as USB 2.0 invalid on Ihse Matrix Switcher?
If port definitions are invalid as USB 2.0 on your Ihse Matrix Switcher, restart the matrix.
What to do if Ihse Draco tera K480-80C Matrix Switcher fans do not run, LED OK on?
If the fans of your Ihse Matrix Switcher are not running, but the LED is OK, contact your dealer because the fans may be defective.
How to fix opening the OSD not possible on Ihse Draco tera K480-80C Matrix Switcher?
If opening the OSD is not possible on your Ihse Matrix Switcher, set jumper 11 on the CON unit.
General| Brand | Ihse |
|---|---|
| Model | Draco tera K480-80C |
| Category | Matrix Switcher |
| Language | English |
To Next Page