Operation
2014-04-15 179
3. Select one of the CPU Devices in the CPU selection list that are
defined in your favorite list.
4. Confirm your selection by pressing the CPU Scanner button. The
scan will automatically start.
5. If you have enabled the Force CPU Scan option, the scan will
automatically start after switching the respective CON Device to any
CPU Device from the favorite list without the need to press the CPU
Scanner button.
6.3 Extended Switching
You have the following options to perform switching operation with the
Draco tera:
OSD
To switch any console to any available CPU, proceed as follows:
Select Extended Switch in the main menu.
Pressing <F8> hides inactive CPU Devices to provide a clearer overview.
To Next Page
Loading...