Ihse Draco tera K480-80C - System Settings; System Data

Draco tera
78 2014-04-15
The selection boxes in the Virtual Console column contain a filter
function for an easy selection of a single CPU from a larger pool of CPUs
(see Chapter
5.2.2, Page 63).
Pos: 59 /806-IHSE/Konfi guration/Syste meinstellung/480- xx/Systemeinste llungen @ 7\mod_1309937961 274_6.doc @ 53032 @ 2 @ 1
5.4 System Settings
You have the option to configure the following system settings at the
Draco tera.
The configuration of the system settings can only be done by users with
administrator rights.
Pos: 60 /806-IHSE/Konfi guration/Syste meinstellung/480- xx/System Data @ 7\mod_1309 938005493_6.doc @ 53050 @ 3 @ 1
5.4.1 System Data
The system configuration is set in this menu.
You have the following options to access the menu:
You can select the following settings:
Field Selection Description
Device
Text
Enter the device name of the matrix
(default: SWITCH_01)
Name
Text
Enter the name of the configuration that is
used to save the current settings
(default: Standard)
Info
Text
Additional text field to describe the
configuration (default: Factory settings)
activated
If the matrix is defined as a sub matrix in
the OSD, the user will lose control. Control
can be recovered by using the keyboard
command <Shift>, <Shift>, <s>, <o>. The
OSD for the matrix that has been defined
as sub matrix will be reopened.
Sub Matrix
deactivated Function not active (default)