Configuration
2014-04-15 145
5.10 Saving and Loading of Configurations
You have the option to set the following administration of configurations:
Pos: 90 /806-IHSE/Konfi guration/480_Spei chern und Laden von Konfi gurationen/480- xx/Zwischenspeicher n von Konfiguratione n @ 7\mod_1309945736118_6. doc @ 54172 @ 3 @ 1
5.10.1 Active Configuration
You have the following option to access the menu:
Select Configuration > Save in the main menu.
By selecting this menu item, the active configuration of the matrix is
saved to the permanent matrix memory. By default, the last
configuration that has been saved in this way will be restored after a
restart of the matrix.
Changing or saving configurations blocks the matrix memory and leads to
a freeze of all OSD menus for a few seconds. The switching connections
are not affected by this freeze.
If you select Auto Save within the system settings an additional automatic
saving of the configuration will be periodically performed (see
Chapter
5.3.2, Page 75).
Pos: 91 /806-IHSE/Konfi guration/480_Spei chern und Laden von Konfi gurationen/480- xx/Speichern von Konfi gurationen (intern) @ 7\mod_1309938789321_6. doc @ 53310 @ 3 @ 1
5.10.2 Saving of Configurations (internal)
In this menu the current matrix configuration is saved to predefined
storage locations. However, it does not replace the buffering of
configuration (see Chapter 5.10.1, Page 145).
You have the following options to access the menu:
In Active, the name and detailed information of the current configuration
are shown. This configuration can be saved.
In Default and File #1 to File #8, the name and detailed information of the
respective saved configuration are shown. These storage locations can be
overwritten.
To Next Page
Loading...