Draco tera
144 2014-04-15
2. Activate Manual option, if the USB-HID switching is to be restricted to
keyboard commands (see Chapter
6.5, Page 187).
Manual switching allows the use of multi-head consoles.
3. In the Arrangement field, select the layout for the CON Devices you
want to configure (1 x 4 or 2 x 2).
The fields for the configuration of the individual displays will be
arranged accordingly.
4. Select one or more control displays within the CON Device by setting
the Control function to Y in the respective display field.
Control displays are referred to the extender units within the Multi-
Screen Control that are connected to keyboard and mouse.
5. When using the Owner function, you can determine which control
display is permitted for USB-HID switching to the different displays.
Select that display from the list.
In order to make a display accessible for all neighboring control
displays, set the Owner function to shared.
6. Use the Frame function to configure a red frame that shows the
current display with mouse control after the expiration of a selectable
timer.
The frame to fade in can be individually activated by using a timer
>0 seconds.
Pos: 89 /806-IHSE/Konfi guration/480_Spei chern und Laden von Konfi gurationen/480- xx/Speichern und Laden von Konfigurationen @ 7\ mod_1309938757899_6. doc @ 53292 @ 2 @ 1
To Next Page
Loading...