Ihse Draco tera K480-80C - Malfunction of Power Supply Units; Network Error; Failure at the Matrix

Draco tera
204 2014-04-15
9.4 Malfunction of Power Supply Units
Diagnosis Possible Reason Measure
No power supply
available
 Check if power supply cables are
connected correctly.
Matrix cannot
be started
Power supply units are
not switched on
 Check switch on the power
supply units.
Pos: 159 /806-IHSE/ Hilfe im Problemfall/ Netzwerkstörung/48 0-xx @ 7\mod_1309944607 415_6.doc @ 54133 @ 2 @ 1
9.5 Network Error
Diagnosis Possible Reason Measure
Network
settings are not
assumed after
editing.
Restart of the matrix not
yet completed.
 Restart the matrix.
Pos: 160 /806-IHSE/ Hilfe im Problemfall/S törung an der Matrix/480- xx @ 7\mod_1309944331383 _6.doc @ 54040 @ 2 @ 1
9.6 Failure at the Matrix
Diagnosis
Possible Reason Measure
Serial control
impossible or
only restrictedly
possible.
CPU and matrix
operating at different
Baud rates.
 Change Baud rate in the matrix
and CPU (see Chapter
5.3.2,
Page 75).
Serial control via
RJ45 port not
possible.
Wrong network cable.  Use a crossed network cable
Port definitions
as USB 2.0
invalid.
Restart of the matrix not
yet completed.
 Restart the matrix.
Pos: 161 /806-IHSE/ Hilfe im Problemfall/Bi ldausfall/480- xxC @ 8\mod_1345797708512_ 6.doc @ 68242 @ 2 @ 1