Draco tera
146 2014-04-15
The storage location to be overwritten by the current configuration must be
selected explicitly.
The current configuration will be saved to this storage location and will be
shown immediately in the menu. The previously saved configuration saved
to this storage location is deleted.
OSD
You have the possibility to save the created configuration within eight
storage locations in the matrix (File #1 – File #8). Additionally a
configuration can also be saved as default configuration.
1. Select Configuration > Save As… in the main menu.
2. Select the required storage location (File #1 – File #8) or Default.
Menu Configuration – Save as
To Next Page
Loading...