Configuration
2014-04-15 169
OSD View Service Mode
3. Start the update by pressing the Update button in the lower part of
the working area.
4. Quit Service Mode after updating after responding to the confirmation
request in the popup window or via Matrix > Deactivate Service
Mode in the task area.
5. Verify after the update in the Java tool via Administration > Update
EXT Firmware in the Protocol tab of the Expert Mode, if the
updates for all extenders have been installed correctly.
Pos: 103 /806-IHSE/Ko nfiguration/480_Li zenzmanagement/48 0-xx @ 8\mod_1352795644 169_6.doc @ 69622 @ 2 @ 1
To Next Page
Loading...