Need help?Do you have a question about the IKA RC 2 lite and is the answer not in the manual?
General| Temperature Range | -20 °C to +40 °C |
|---|---|
| Temperature Control Accuracy | ±0.1 °C |
| Pump Pressure | 0.2 bar |
| Cooling Capacity | 200 W (at 20°C) |
| Temperature Stability | ±0.1 °C |
| Power Supply | 230 V / 50 Hz |
Detailed explanation of warning symbols like Danger, Warning, Caution, and Notice.
Explanation of general symbols indicating correct/incorrect actions and notes.
Read instructions, keep them accessible, and ensure staff are trained for safe operation.
Ensuring proper placement, ventilation, and access to the power switch for safety.
Adhering to safety measures when working with the device and hazardous materials.
Steps for cleaning, including using approved agents and safety precautions.
Protect devices from impact and check for damage before each use.
Use original cord, ensure accessible socket, and disconnect power before maintenance.
Illustrates the sequence of operations for switching the device on.
Step-by-step instructions for entering menus and changing settings.
Detailed breakdown of menu options, parameters, and default values.
Details on modes A, B, and C for automatic restart and setting protection.
Setting maximum/minimum temperatures and selecting fluid types for operation.
Overview of AUTO 1 and AUTO 0 control types with PID parameter explanations.
Enable or disable alarms and button tones for device operation.
Guide to resetting calibration or performing 2-point calibration.
Option to revert device settings to their original factory defaults.
Details on connecting USB devices for hot plugging and automatic recognition.
Instructions for downloading and installing USB drivers for IKA devices.
Details on transmission procedure, character format, and speed for RS 232.
Rules for sending commands, parameters, and data via RS 232 interface.
Information on PC connection cables for RS 232 and USB interfaces.
Procedure for updating the device firmware using the IKA Firmware update tool.
Steps for cleaning, including using approved agents and safety precautions.
Information required for ordering spare parts, including device type and serial number.
Instructions for sending the device for repair and obtaining a decontamination certificate.
Guidance on identifying and resolving error codes E15, E16, E17, and E19.
Catalog of various hoses and adapters for connecting fluids and external devices.
Insulation options for tubes to maintain temperature stability.
Includes cables (RS 232, USB) and software (Labworldsoft®).
To Next Page
