6 7
EU Declaration of conformity
Source language: German
Explication of warning symbols
/// Warning symbols
Indicates an (extremely) hazardous situation, which, if not avoided, will
result in death, serious injury.
Danger!
Indicates a hazardous situation, which, if not avoided,
can result in
death, serious injury.
Warning!
Indicates a potentially hazardous situation, which, if not avoided, can
result in injury.
Caution!
!
Indicates practices which, if not avoided, can result in equipment damage.
Notice!
/// General Symbols
Position number
A–––
Correct / Result
Shows the correct execution or the result of an action step.
Wrong
Shows the incorrect execution of an action step.
Note
Displays action steps that require particular attention to detail.
/// Device setup
Caution!
› The power switch of the device must be accessed immediately, directly and without risk at
any time. If access to the power switch cannot be ensured, an additional emergency stop
switch that can be easily accessed must be installed in the work area.
!
Notice!
›
Set up the device in a spacious area on an even, stable, clean, non-slip, dry and fireproof surface.
› The device has been constructed to the requirements of EU (European Union) and EFTA
(European Free Trade Association) countries.
›
Insucient ventilation may result in the formation of explosive mixtures. Only use the device
in well ventilated areas.
Safety instructions
/// General information
›
Read the operating instructions completely before starting up and follow the safety
instructions.
› Keep the operating instructions in a place where it can be accessed by everyone.
› Ensure that only trained staff work with the device.
› Follow the safety instructions, guidelines, occupational health and safety and accident
prevention regulations.
› The device must only be used in a technically perfect condition.
!
Notice!
› Pay attention to the marked sites in Fig. 1.
!
/// Working with the device
Danger!
› Do not use the device in explosive atmospheres, it is not EX-protected.
› With substances capable of forming an explosive mixture, appropriate safety measures must
be applied, e.g. working under a fume hood.
› To avoid body injury and property damage, observe the relevant safety and accident preven-
tion measures when processing hazardous materials.
Warning!
›
Process pathogenic material only in closed vessels under a suitable fume hood. Please contact
IKA application support if you have any question.
› When using critical or hazardous materials in your processes, IKA recommends to use ad-
ditional appropriate measures to ensure safety in the experiment. For example, users can
implement comprehensive monitoring equipment.
Caution!
› Do not start up the device if:
- It is damaged or leaking
- Cable (not only the power cable) is damaged.
We declare under our sole responsibility that this product corresponds to the regulations
2014/35/EU, 2006/42/EC, 2004/108/EC and 2011/65/EU and conforms with the standards or
other normative documents: EN 61010-1, EN 61010-2-010, EN 61326-1, EN 60529, EN ISO 12100
and DIN 12876-1
.
A copy of the complete EU Declaration of Conformity can be requested at sales@ika.com.
Indicates the risk of fire or explosion!
Warning!
To Next Page
Loading...