How to activate IKEA HYGIENISK Dishwasher?
If you cannot activate your IKEA Dishwasher, ensure that the mains plug is properly connected to the mains socket and check the fuse box for any damaged fuses.
How to improve poor drying results in IKEA Dishwasher?
To improve drying results in your IKEA Dishwasher, avoid leaving tableware inside the closed appliance for too long. Activate AutoOpen to automatically open the door and improve drying. Ensure there is enough rinse aid or adjust the rinse aid level. Consider the quality of the rinse aid and use it even with multi-tablets. Remember that plastic items may need towel drying, and check if the selected program includes a drying phase.
What to do if I see limescale deposits in my IKEA HYGIENISK Dishwasher?
If you observe limescale deposits in your IKEA Dishwasher, check the following: * Ensure the salt level is adequate, and check the refill indicator. * Verify the salt container cap is tightly closed. * Your tap water may be hard. Refer to 'The water softener'. * Even with multi-functional tabs, use salt and set regeneration of the water softener. Refer to 'The water softener'. * If deposits persist, use appliance cleaners specifically for limescale. * Try a different detergent. * Contact the detergent manufacturer for further advice.
Why are the dishes wet after using my IKEA Dishwasher?
If the dishes are wet after a cycle in your IKEA Dishwasher, activate the DryPlus option and set AutoOpen for the best drying performance. Check that the programme includes a drying phase with sufficient temperature. Ensure the rinse aid dispenser is full and that you are using a quality rinse aid, or multi-tablets.
How to solve poor washing results with IKEA Dishwasher?
To address poor washing results with your IKEA Dishwasher, consider using a more intensive washing program or activating the Power Clean option. Also, clean the spray arm jets and filter.
How to improve IKEA HYGIENISK washing results?
If you are getting poor washing results from your IKEA dishwasher, consider the following: * Consult the "Daily use", "Hints and tips" sections and the basket loading leaflet. * Try a more intensive wash program. * Activate the Power Clean option to enhance washing performance. * Clean the spray arm jets and filter, referring to "Care and Cleaning".
How to activate my IKEA HYGIENISK Dishwasher?
If you cannot activate your IKEA Dishwasher, ensure that the mains plug is properly connected to the mains socket and check that there is no damaged fuse in the fuse box.
What to do if my IKEA Dishwasher does not drain the water?
If your IKEA Dishwasher doesn't drain water and the display shows an error, check these items: Ensure the sink spigot, the filter in the outlet hose, and the interior filter system are not clogged. Also, make sure the drain hose has no kinks or bends.
What to do if my IKEA HYGIENISK Dishwasher is not draining?
If your IKEA Dishwasher isn't draining water and the display shows an error, check the following: * Ensure the sink spigot is not clogged. * Make sure the filter in the outlet hose is not clogged. * Verify the interior filter system is not clogged. * Confirm that the drain hose has no kinks or bends.
What to do if my IKEA HYGIENISK Dishwasher won't start?
If the program on your IKEA Dishwasher doesn't start, try the following: * Ensure that the appliance door is fully closed. * If the delay start is set, either cancel the setting or wait for the countdown to finish. * Note that the appliance may be undergoing a procedure to recharge the resin inside the water softener, which takes about 5 minutes.
General| Type | Built-in |
|---|---|
| Water Consumption per Cycle | 9.5 liters |
| Child Lock | Yes |
| Features | Rinse aid indicator, Salt indicator |
| Delay Start | 1-24 hours |
Appliance can be used by children aged 8+ and persons with reduced capabilities if supervised. Keep young children away unless supervised.
Intended for household and similar applications. Do not change specifications. Follow water pressure, place settings, and cord safety rules.
Warning! Only a qualified person must install this appliance. Follow instructions and ensure safe placement.
Warning! Risk of fire and electric shock. Ensure correct grounding, socket, and cable connections.
Do not damage water hoses. Ensure no leaks. Water inlet hose has a safety valve.
Covers opening tap, activating appliance, filling containers, loading baskets, adding detergent, and starting.
Instructions on placing detergent or multi-tablets in the compartment and usage advice.
Guide on pressing programme buttons, activating options, and closing the door.
How to use AUTO programme and set a delayed start time.
Introduces a table of common issues and their possible causes and solutions.
Solutions for issues like not starting, filling, draining, flood device, and technical malfunctions.
Solutions for door problems, rattling sounds, and poor washing/drying results.
To Next Page
