How to fix a leak from IKEA HYGIENISK Dishwasher door?
If you notice a small leak from the door of your IKEA Dishwasher, it might not be leveled correctly. Try adjusting the feet to level it. If that doesn't work, the door might not be centered, so adjust the rear foot if possible.
What to do if IKEA HYGIENISK programme does not start?
If the program on your IKEA Dishwasher doesn't start, make sure the appliance door is completely closed. Also, if the delay start is set, either cancel the setting or wait for the countdown to finish.
How to fix small leak from the IKEA Dishwasher door?
If there is a small leak from the door of your IKEA Dishwasher, the appliance might not be leveled correctly. Try loosening or tightening the adjustable feet, if applicable. Also, the appliance door might not be centered on the tub, so adjust the rear foot, if applicable.
Why does my IKEA HYGIENISK trip the circuit breaker?
If your IKEA Dishwasher trips the circuit-breaker, it could be due to insufficient amperage to supply all appliances in use simultaneously. Alternatively, there may be an internal electrical fault within the appliance. In the latter case, contact an Authorised Service Centre.
What does it mean if my IKEA HYGIENISK anti-flood device is on and the display shows i30?
If the anti-flood device is activated on your IKEA Dishwasher and the display shows i30, close the water tap. Ensure the appliance is installed correctly and that the baskets are loaded as instructed in the user manual.
Why does my IKEA HYGIENISK keep stopping and starting?
If your IKEA Dishwasher stops and starts frequently during operation, this is normal. It helps provide optimal cleaning results and saves energy.
How to improve poor drying results in IKEA Dishwasher?
To improve drying results in your IKEA Dishwasher, avoid leaving tableware inside the closed appliance for too long. Activate AutoOpen to automatically open the door and improve drying. Ensure there is enough rinse aid or adjust the rinse aid level. Consider the quality of the rinse aid and use it even with multi-tablets. Remember that plastic items may need towel drying, and check if the selected program includes a drying phase.
How to fix traces of rust on cutlery in IKEA Dishwasher?
If you see traces of rust on cutlery in your IKEA Dishwasher, there might be too much salt in the water used for washing. Also, avoid placing silver and stainless steel cutlery together.
How to solve poor washing results with IKEA Dishwasher?
To address poor washing results with your IKEA Dishwasher, consider using a more intensive washing program or activating the Power Clean option. Also, clean the spray arm jets and filter.
What to do if there are stains and dry water drops on glasses and dishes from IKEA HYGIENISK Dishwasher?
If your IKEA Dishwasher leaves stains and dry water drops on glasses and dishes, the released quantity of rinse aid might not be sufficient. Try adjusting the rinse aid level to a higher setting, or consider that the quality of the rinse aid can be the cause.
General| Type | Built-in |
|---|---|
| Water Consumption per Cycle | 9.5 liters |
| Child Lock | Yes |
| Features | Rinse aid indicator, Salt indicator |
| Delay Start | 1-24 hours |
Appliance can be used by children aged 8+ and persons with reduced capabilities if supervised. Keep young children away unless supervised.
Intended for household and similar applications. Do not change specifications. Follow water pressure, place settings, and cord safety rules.
Warning! Only a qualified person must install this appliance. Follow instructions and ensure safe placement.
Warning! Risk of fire and electric shock. Ensure correct grounding, socket, and cable connections.
Do not damage water hoses. Ensure no leaks. Water inlet hose has a safety valve.
Covers opening tap, activating appliance, filling containers, loading baskets, adding detergent, and starting.
Instructions on placing detergent or multi-tablets in the compartment and usage advice.
Guide on pressing programme buttons, activating options, and closing the door.
How to use AUTO programme and set a delayed start time.
Introduces a table of common issues and their possible causes and solutions.
Solutions for issues like not starting, filling, draining, flood device, and technical malfunctions.
Solutions for door problems, rattling sounds, and poor washing/drying results.
To Next Page
