Why my IKEA HYGIENISK Dishwasher is not filling with water and shows i10 or i11?
If your IKEA dishwasher is not filling with water and the display shows i10 or i11, make sure of the following: * The water tap is completely open. * The water supply pressure is adequate (contact your local water authority for information). * The water tap isn't clogged. * The filter in the inlet hose is clean. * The inlet hose isn't kinked or bent.
Why does my IKEA HYGIENISK keep stopping and starting?
If your IKEA Dishwasher stops and starts frequently during operation, this is normal. It helps provide optimal cleaning results and saves energy.
Why is there detergent left in my IKEA HYGIENISK dispenser?
If there are detergent residues in the dispenser of your IKEA Dishwasher after a cycle, the detergent tablet may have gotten stuck. Ensure the spray arm isn't blocked or clogged, preventing water from washing away the detergent. Also, check that items in the baskets aren't blocking the detergent dispenser lid from opening.
Why is my IKEA HYGIENISK door hard to close?
If the door of your IKEA Dishwasher is difficult to close, the appliance may not be level. Try loosening or tightening the adjustable feet. Also, ensure that no parts of the tableware are protruding from the baskets.
Why does the IKEA HYGIENISK Dishwasher programme lasts too long?
If your IKEA Dishwasher program lasts too long, check if the delay start option is activated and either cancel it or wait for the countdown to finish. Also, keep in mind that activating certain options can increase the program's duration.
How to fix a leak from IKEA HYGIENISK Dishwasher door?
If you notice a small leak from the door of your IKEA Dishwasher, it might not be leveled correctly. Try adjusting the feet to level it. If that doesn't work, the door might not be centered, so adjust the rear foot if possible.
What to do if IKEA HYGIENISK programme does not start?
If the program on your IKEA Dishwasher doesn't start, make sure the appliance door is completely closed. Also, if the delay start is set, either cancel the setting or wait for the countdown to finish.
Why is there unusual foam in my IKEA HYGIENISK Dishwasher?
If you notice unusual foam during washing in your IKEA Dishwasher, make sure you are only using detergent specifically designed for dishwashers. Also, there may be a leak in the rinse aid dispenser, in which case you should contact an Authorised Service Centre.
What to do if my IKEA HYGIENISK won't fill with water and shows i10 or i11?
If your IKEA Dishwasher isn't filling with water and the display shows i10 or i11, make sure the water tap is open and the water supply pressure isn't too low. Also, check that the water tap and the filter in the inlet hose are not clogged, and that the inlet hose has no kinks or bends.
Why is my IKEA HYGIENISK leaking from the door?
If there's a small leak from the door of your IKEA Dishwasher, the appliance might not be level. Try loosening or tightening the adjustable feet. If the door isn't centered on the tub, adjust the rear foot.
General| Type | Built-in |
|---|---|
| Water Consumption per Cycle | 9.5 liters |
| Child Lock | Yes |
| Features | Rinse aid indicator, Salt indicator |
| Delay Start | 1-24 hours |
Appliance can be used by children aged 8+ and persons with reduced capabilities if supervised. Keep young children away unless supervised.
Intended for household and similar applications. Do not change specifications. Follow water pressure, place settings, and cord safety rules.
Warning! Only a qualified person must install this appliance. Follow instructions and ensure safe placement.
Warning! Risk of fire and electric shock. Ensure correct grounding, socket, and cable connections.
Do not damage water hoses. Ensure no leaks. Water inlet hose has a safety valve.
Covers opening tap, activating appliance, filling containers, loading baskets, adding detergent, and starting.
Instructions on placing detergent or multi-tablets in the compartment and usage advice.
Guide on pressing programme buttons, activating options, and closing the door.
How to use AUTO programme and set a delayed start time.
Introduces a table of common issues and their possible causes and solutions.
Solutions for issues like not starting, filling, draining, flood device, and technical malfunctions.
Solutions for door problems, rattling sounds, and poor washing/drying results.
To Next Page
