What to do if my IKEA HYGIENISK Dishwasher is not draining?
If your IKEA Dishwasher isn't draining water and the display shows an error, check the following: * Ensure the sink spigot is not clogged. * Make sure the filter in the outlet hose is not clogged. * Verify the interior filter system is not clogged. * Confirm that the drain hose has no kinks or bends.
What to do if my IKEA Dishwasher does not drain the water?
If your IKEA Dishwasher doesn't drain water and the display shows an error, check these items: Ensure the sink spigot, the filter in the outlet hose, and the interior filter system are not clogged. Also, make sure the drain hose has no kinks or bends.
What to do if my IKEA HYGIENISK Dishwasher won't drain and shows i20?
If your IKEA Dishwasher isn't draining and the display shows i20, check if the sink spigot is clogged. Also, ensure that the interior filter system is not clogged and the drain hose has no kinks or bends.
What to do if my IKEA HYGIENISK Dishwasher doesn't drain and shows i20?
If your IKEA dishwasher isn't draining water and the display shows i20, check these items: * Ensure the sink spigot isn't clogged. * Confirm the interior filter system is clear. * Verify the drain hose isn't kinked or bent.
How to fix IKEA Dishwasher that will not turn on?
If your IKEA dishwasher won't start, ensure that: * The mains plug is correctly connected to the mains socket. * There is no blown fuse in the fuse box.
What to do if my IKEA HYGIENISK Dishwasher program does not start?
If your IKEA Dishwasher program isn't starting, make sure the appliance door is completely closed. If the delay start function is enabled, either cancel the setting or wait for the countdown to finish.
What to do if my IKEA HYGIENISK won't activate?
If you cannot activate your IKEA Dishwasher, make sure that the mains plug is properly connected to the mains socket and that there is no damaged fuse in the fuse box.
What to do if I see limescale deposits in my IKEA HYGIENISK Dishwasher?
If you observe limescale deposits in your IKEA Dishwasher, check the following: * Ensure the salt level is adequate, and check the refill indicator. * Verify the salt container cap is tightly closed. * Your tap water may be hard. Refer to 'The water softener'. * Even with multi-functional tabs, use salt and set regeneration of the water softener. Refer to 'The water softener'. * If deposits persist, use appliance cleaners specifically for limescale. * Try a different detergent. * Contact the detergent manufacturer for further advice.
Why are my dishes wet after using IKEA HYGIENISK?
If your dishes are wet after a cycle in your IKEA Dishwasher, consider the following: * Activate the DryPlus option and set AutoOpen for better drying. * The program may lack a drying phase or use a low-temperature drying phase. * The rinse aid dispenser might be empty. * The quality of the rinse aid could be a factor. * The quality of the multi-tablets could be the cause. Try a different brand, or activate the rinse aid dispenser and use rinse aid with multi-tablets.
How to activate IKEA HYGIENISK Dishwasher?
If you cannot activate your IKEA Dishwasher, ensure that the mains plug is properly connected to the mains socket and check the fuse box for any damaged fuses.
General| Type | Built-in |
|---|---|
| Water Consumption per Cycle | 9.5 liters |
| Child Lock | Yes |
| Features | Rinse aid indicator, Salt indicator |
| Delay Start | 1-24 hours |
Appliance can be used by children aged 8+ and persons with reduced capabilities if supervised. Keep young children away unless supervised.
Intended for household and similar applications. Do not change specifications. Follow water pressure, place settings, and cord safety rules.
Warning! Only a qualified person must install this appliance. Follow instructions and ensure safe placement.
Warning! Risk of fire and electric shock. Ensure correct grounding, socket, and cable connections.
Do not damage water hoses. Ensure no leaks. Water inlet hose has a safety valve.
Covers opening tap, activating appliance, filling containers, loading baskets, adding detergent, and starting.
Instructions on placing detergent or multi-tablets in the compartment and usage advice.
Guide on pressing programme buttons, activating options, and closing the door.
How to use AUTO programme and set a delayed start time.
Introduces a table of common issues and their possible causes and solutions.
Solutions for issues like not starting, filling, draining, flood device, and technical malfunctions.
Solutions for door problems, rattling sounds, and poor washing/drying results.
To Next Page
