29
WATER CON-
SUMPTION IN
LITRES (DE-
PENDING ON
MODEL)
REGENERA-
TION OF THE
WATER
SOFTENING
SYSTEM AFTER
X RINSE
CYCLES
ADDITIONAL
RUNNING
TIME IN
MINUTES
ADDITIONAL
WATER CON-
SUMPTION IN
LITRES
ADDITIONAL
POWER CON-
SUMPTION IN
KWH
above 10.5 5 7 5 0.05
The consumption values specified are
laboratory measurements determined
in accordance with the currently applic-
able standard and using the Eco 50°
programme and the factory value of the
water hardness is set to 16 - 20°E.
Rinse aid system
Rinse aid system
You can use the rinse aid system and
rinse aid to get tableware and glasses
rinsed perfectly without marks.
Rinse aid
For optimum drying results, use rinse
aid.
Only use rinse aid for domestic dish-
washers.
Adding rinse aid
If the rinse aid refill indicator lights up,
top up with rinse aid. Only use rinse aid
for domestic dishwashers.
1. Press the catch on the lid of the dis-
penser for rinse aid and lift .
2. Add rinse aid up to the max mark.
3. If rinse aid spills out, remove it from
the tub.
Spilled rinse aid can cause excessive
frothing during the wash cycle.
4. Close the lid of the dispenser for
rinse aid.
a The lid clicks into position.
Setting the amount of rinse
aid
If there are streaks or water marks on
tableware, change the amount of rinse
aid.
1.
Press .