57
Clean wastewater pump
Large remnants of food or foreign bod-
ies can block the waste water pump. As
soon as the rinsing water no longer
drains properly, the waste water pump
must be cleaned.
WARNING
Risk of injury!
Sharp and pointed objects or frag-
ments of glass may block the waste
water pump and cause injury.
● Remove any foreign bodies carefully.
1. Disconnect the appliance from the
power supply.
2. Remove the top and bottom basket.
3. Remove the filter system.
4. Scoop out any water.
Use a sponge if necessary.
5. Prise off the pump cover using a
spoon and grip it by the crosspiece.
6. Lift the pump cover inwards at an
angle and remove.
7. Remove any remnants of food and
foreign bodies in the area of the im-
peller.
8.
Insert the pump cover and press
down .
a The pump cover clicks into position.
9. Install the filter system.
10. Insert the top and bottom basket.
Transportation, storage and disposal
Transportation, storage and disposal
You can find out here how to prepare
your appliance for transportation and
storage. You will also find out how to
dispose of old appliances.
Removing the appliance
1. Disconnect the appliance from the
power supply.
2. Turn off the water tap.
3. Detach the drainage connection.
4. Detach the drinking water connec-
tion.
5. Loosen any screws fastening the ap-
pliance to cabinet parts.
6. Remove the base panel if fitted.
To Next Page
Loading...
Need help?
General
