IKEA PROFFSIG User Manual

38
Basic settings
Basic settings
You can configure the appliance to meet your needs.
Overview of basic settings
The basic settings depend on the features of your appliance.
BASIC SETTING DISPLAY
TEXT
SELECTION DESCRIPTION
Water hardness H:04 H:00 - H:07 Set the water softening sys-
tem to your water hardness.
→"Setting water softening sys-
tem", Page27
Level H:00 switches the water
softening system off.
Rinse aid dispens-
ing
r:05 r:00 - r:06 Set the amount of rinse aid to
be dispensed.
→"Setting the amount of rinse
aid", Page29
Switch the rinse aid system
off with level r:00.
Intensive drying d:00 d:00 - d:01 The temperature is increased
during the final rinse, which
improves the drying result.
This may increase the run
time slightly.
Note:Not suitable for delic-
ate items of tableware.
Switch Extra Dry on "d:01" or
off "d:00".
Hot water A:00 A:00 - A:01 Set cold water or hot water
connection. Only set the ap-
pliance to hot water if this can
be prepared with little energy
and a suitable installation is
available, e.g. solar heating
system with circulation line.
The water temperature
should be at least 40°C and
max. 60°C.
Switch hot water on "A:01" or
off "A:00".

IKEA PROFFSIG Specifications

General

Brand	IKEA
Model	PROFFSIG
Category	Dishwasher
Language	English