39
BASIC SETTING DISPLAY
TEXT
SELECTION DESCRIPTION
Time-beam-on-
floor
S:01 S:00 - S:02 Switch Time-beam-on-floor on
or off.
While the programme is run-
ning, status information is
projected onto the floor be-
low the appliance door relat-
ing to timer programming,
the programme or the time
remaining. If the base panel is
pulled forwards or if the ap-
pliance is installed at eye level
with the cabinet front fitted
flush, the display is not vis-
ible.
Level "S:00" switches the
Time-beam-on-floor of.
Tone volume b:02 b:00 - b:03 Adjustment of tone volume.
End of programme indicated
by an audible signal tone.
Level "b:00" switches the sig-
nal tone off.
If the Eco drying function is
activated, the end of the pro-
gramme is not indicated by
an audible signal tone.
Eco drying o:01 o:00 - o:01 Activate or deactivate auto-
matic door opening at the
end of the Eco programme.
Note
Eco drying is deactivated
when
● Intensive drying is
switched on.
● The Eco 50° programme
has been selected in con-
junction with one or more
additional functions.
● The button lock has been
activated.
Level "o:00" switches Eco dry-
ing off.
To Next Page
Loading...
Need help?
General
