Image Access Bookeye 5 V2 - Network and Foot Switch Setup

Prepare for Setup
21
Establish the Network Connection
CAUTION
Incorrect routing of the connection cables can cause
tripping.
Fractures, contusions and bruises can be the result.
➢ Place the connecting cables so that no one can trip over
them.
To establish the network connection, proceed as follows:
➢ Connect one plug of the enclosed network cable to the network
connector socket on the back of the scanner.
➢ Connect the second plug to the network socket of an existing network.
Connect the Foot Switch
➢ Connect the plug of the foot switch to the connector socket for the foot
switch, located on the back of the scanner.