➢ Do not lean on the scanner.
➢ Make sure that the thickness of the original to be scanned does not
exceed 3 mm.
➢ Do not use cleaning agents containing abrasive additives, solvents or
acids. Use a damp microfiber cloth.
➢ Use only your finger to operate the touch screen. Other objects may
damage the touchscreen.
Responsibility of the operator
The scanner operator must ensure that only qualified personnel perform
the scanner setup.
Personnel qualification
Personnel performing setup of the scanner must be knowledgeable in
setting up, connecting, and operating computer accessories.
To Next Page
Loading...
Need help?
General
