Establish network connection
Incorrect routing of the connection cables can cause
tripping, broken bones, bruises and crushing.
➢ Lay the connection cables so that no one can trip over
them.
To establish the network connection, follow the steps below:
➢ Connect one plug of the supplied network cable to the network
connection jack on the back of the scanner.
➢ Connect the second plug to the network connection socket of an
existing network.
Place the scanner on the optional base
The scanner weighs between 19 kg (42 lbs.) and 34 kg
(75 lbs.).
➢ Use a second person to carry the scanner.
➢ When setting up the scanner, secure it to prevent it from
falling.
To place the scanner on the optional base, follow the steps below:
➢ Assemble the optional base according to the assembly instructions
provided.
➢ Place the scanner on the optional base according to the mounting
instructions provided.
Connecting the optional monitor
Incorrect routing of the connection cables can cause
tripping, broken bones, bruises and crushing.
➢ Lay the connection cables so that no one can trip over
them.
To Next Page
Loading...
Need help?
General
