Image Access WideTEK 36CL - Page 62

Perform setup
62
The "User Settings" screen is displayed.
Configure GUI
selection:
Access the submenu for setting the applications in
the startup screen.
Default:
restore the default settings of the scanner
Language:
Select language
Display Standby
After:
define the time of inactivity until an optional
external monitor and the touch screen go into
standby mode
Screen Saver After:
Define the time of inactivity until the screen saver
is activated.
Devices Standby
After:
define the time of inactivity until the scanner
enters standby mode
Select language
To select the language, proceed as follows:
➢ Tap on the selection arrow of the "Language" selection menu to display
the list of languages.
➢ Tap on the desired language (2).
➢ To return to the previous submenu, tap BACK (1).
➢ To return to the "Home Screen" screen, tap EXIT (3).