Image Access widetek 44 User Manual

/ /
Page 28 Manual
C.1 Select Application Screen
When the WideTEK
®
scanner starts from standby mode and finishes the startup
procedure, the touchscreen displays the Select Application screen.
Picture 10: Select application screen after start-up
Touching one of these buttons activates the Scan2Net
®
kiosk
application.
The Easy mode differs from the Expert mode by a reduced number
of available parameters.
The description of the Scan2Net
®
user interface describes the Expert
mode with all parameters. See chapter C.3 and subchapters.
Touching this button will switch to a user programmable application.
As factory default the EasyScan application is integrated.
To leave the application, touch a free section in the title line of the
application. Confirm the request by touching the STOP button.
Touching this button switches to the start screen of the integrated
ScanWizard application.

Image Access widetek 44 Specifications

General

Brand	Image Access
Model	widetek 44
Category	Scanner
Language	English