SETdecreasebutton,or
thesettingwill change
totheletter"C," for a
corded pulse sensor.
The setting can be changed back by pressing the
button again.
To exit the informationmode, remove the key.
HOW TO ADJUST THE ANGLE OF THE CONSOLE
In order for the console to receive signalsfrom the
pulse sensor, the console must be angled toward the
pulse sensor. Loosen the knobson the ends of the
console crossbar, rotate the console to the proper
angle, and retlghten the.knobs.
Knob ob
nvvv IU/_LAJU_ I INI_ _,.;U_I'IIUN L.P.Vt'I.
The rear legs ofthe treedmlUare designedtocushion
the Impactas youwalk orrunon the treadmill.The
legscan be adjustedfor a firmeror softercushion
level usingthe knobonthe dghtsldeofthetreadmill
For a firmer cushion level, tum the knob dockwLse;for
asofter cushion level, tum the knob counterclockwise.
Note: The faster you run on the treadmill, the firmer
the cushion level should be. If the cushion level istoo
soft, the treadmill will bounce excessively.
To Next Page
Loading...
