Imesa ECC - Table of Contents; Manual Contents; Safety Rules

K2950SCHEDESS_01 – K2950SCHEDESS_02 (E141203X)
25/08/2015
2
INDEX:
1. MANUAL CONTENTS ........................... 2
2. SAFETY RULES .................................... 2
3. MANUFACTURER LIABILITY ............... 3
4. NECESSARY TOOLS ............................ 3
5. COMPOSITION OF THE KIT ................. 4
6. 2950SCHEDESS_01 INSTALLATION
OF ELECTRONICS PART............................ 4
7. INSTALLATION OF THE KIT
K2950SCHEDESS_01 – ECC/IM7 CABLING
(6141102X) ................................................... 7
8. INSTALLATION OF THE KIT
K2950SCHEDESS_01 – CONTACTORS
CONNECTION .............................................. 9
9. KEYPAD AND DISPLAY
INSTALLATION .......................................... 10
10. INSTALLATION OF THE
K2950SCHEDESS_02 KIT – COIN
OPERATED DRYERS ................................ 12
11. ELECTRIC DIAGRAMS -
CONVERSION CABLING ECC/IM7
6141102X.................................................... 14
12. ELECTRIC DIAGRAM OF IM7
CONTROLLED DRYERS ........................... 15
1. MANUAL CONTENTS
The received kit can be installed in tumble
dryers “E” series, capacity: 10/14/18/23/34
Kg.
This instructions are valid for machines
produced starting from March 2002 until the
serial number E200912064 (December
2009), which were originally equipped with an
ECC – ENTITY control board.
This kit is necessary to update the dryer with
the latest IM7 microprocessor, which has
replaced the old electronic timer since
January 2010.
This document complies with the European
Community Directives in force.
The here written information are addressed to
the technician, who must be sure to fully
understand them before to service the
machine.
These instructions must always be available
for consultation. In case of lost or damage,
please ask to the manufacture for a new
copy.
The manufacturer is not responsible for
consequences arising from the improper use
of the new device installed due to missing or
incomplete reading of this manual.
The manufacturer reserves the right to
change the specifications mentioned in this
manual or the characteristics of each
machine.
Some illustrations in this manual may be
partially different from those assembled on
the machines. Diagram and technical data
may be modified without any previous notice.
The manual, its attachment and this
instruction are part themselves of the
machine, they must be stored near the
machine and follow the machine in case of
sale to another user or technician.
2. SAFETY RULES
Ignoring the following safety rules can cause
damages to people, things and animals.
The installation and maintenance of the here
described component must be performed by
authorized personnel who knows the product