11. NORMAL OPERATION CONDITIONS
During “normal operation” the room temperature is displayed for 20 seconds (indicated by °C TA), alternating with the display
of current time for 10 seconds.
The following values are displayed as well (see chapter 3):
➞ The REDUCED temperature value (indicated by °C T2)
➞ The “hours/temperature”chart of the current day operational program, with its temperature levels T1 and T2
➞ The symbol “clock” ( )
➞ The reading “OK-OK”
➞ The symbol “sun” (✲) or the symbol “igloo”( ) for summer or winter operation
➞ The symbol “flame” ( ) indicating that the boiler or the air conditioner are on.
12. OVERRIDE MODE
This function allows the OVERRIDE of the running program so
that the chronothermostat keeps CONSTANTLY one of the two
temperature levels (NORMAL “T1” or REDUCED “T2”) or the
ANTIFROST mode (
❄), factory pre-set at 6°C.
To ACTIVATE the override mode:
• Press
once the F button to activate the ANTIFROST mode
(6°C)
• Press
twice the F button to activate the REDUCED tempera-
22
(fig.13)
LIBR. CRX/E INGLESE 24-01-2000 16:42 Pagina 23
To Next Page
Loading...
