25
WARNING:
THE REPLACEMENT OF THE KNOB WITH THE HOLE-CAP MUST BE CARRIED OUT ONLY BY QUALIFIED PERSON-
NEL.
16. UNIT RESET
Pressing the reset button (R) does not modify the active operation program, but it takes the clock back to zero and the “T2”
REDUCED temperature back to 16°C (winter mode) or 26°C (summer mode).
When the reset button (R) is pressed, the chronothermostat runs a “self-test”, lighting up all the segments on the display for a
few seconds. After that, it starts automatically the CLOCK SETTING mode, assuring (if it has not been programmed) a simple
room-thermostat operation (knob temperature “sun”).
(fig.16)
(fig.17)
(fig.18)
LIBR. CRX/E INGLESE 24-01-2000 16:42 Pagina 26
To Next Page
Loading...
