8-15
Name Description
LED
monitor
displays
Alarm
output
[30A,B,C]
Operation
Protection
Start
check
function
Inverters prohibit any run operations and displays
"E
6 " on the LED of keypad if any run command is
given when:
- Powering up
- Releasing an alarm (
key turned on)
- Link command (LE) has switched inverter
operations
E 6
Yes
RS485
communication
error
On detecting an RS485 communication error, the inverter displays
the alarm code.
E 8 Yes
Data save error
during
undervoltage
If the data could not be saved during activation of the undervoltage
protection function, the inverter displays the alarm code.
E F Ye s
To Next Page
Loading...
