IN-COMMAND NCSP3 User Manual

44 pages

To Next Page

To Next Page

To Previous Page

To Previous Page

Page #24 background image

NCSP3

23

4. A Bluetooth pairing request will appear on

the DC and mobile device.

4.1 Press "OK" on the mobile device.

5. The mobile device will be displayed in the

"Paired devices" list on the mobile App.

Table of Contents

Questions and Answers:

R
richardmcdonaldAug 8, 2025
How to troubleshoot IN-COMMAND Measuring Instruments Display Commander (DC) when it will not turn ON?
- C
  cmcmahonAug 8, 2025
  If the IN-COMMAND Measuring Instruments Display Commander (DC) won't turn on or the front panel isn't working, try these steps: * First, check for +12VDC on the Positive (+) input at the back of the DC. * Next, verify there is Ground on the Negative (-) input, also on the back of the DC. * Then, inspect the fuse in the Distribution Panel. * Finally, attempt to cycle the power using the power button.
S
Sandra CunninghamAug 12, 2025
What to do if there is no power to the IN-COMMAND NCSP3 Body Control Module (BCM)?
- N
  nicole96Aug 12, 2025
  If there is no power to the IN-COMMAND Measuring Instruments Body Control Module (BCM), verify the following: * Check for +12VDC on pin 90. * Check for Ground on pin 86. * Check the fuse in the Distribution Panel.

IN-COMMAND NCSP3 Specifications

General

Brand	IN-COMMAND
Model	NCSP3
Category	Measuring Instruments
Language	English

Related product manuals

Preview: IN-COMMAND NCSP3CM

IN-COMMAND NCSP3CM