IN-COMMAND NCSP3

NCSP3
34
• GLOBAL CONNECT*
iN-Command is able to connect to Android and iOS devices through the cloud.
* Requires Wi-Fi services for this feature.
** Motorized functions are not available through the Global Connect feature.
To setup a cloud account, the device app rst needs to be paired with the iN-Command via Bluetooth.
(Follow Bluetooth pairing instructions for your device).
1. On the DC, select Settings.
2. Select the Wi-Fi tab. In the Wi-Fi page, press the “Off” button at
the bottom of the page to turn Wi-Fi “On” and “Scan” for available
Wi-Fi signals in your area.
3. Select the Wi-Fi SSID and enter the passcode.