NCSP3
26
• HVAC
From the HVAC page, you can control the Heating, Ventilation
and Air conditioning functions in the RV.
With iN-Command, you can control up to 4 HVAC zones and
schedule times for the HVAC function to be active.
The Vent fans for each zone can be opened, closed and the fan speed
can be switched between low, medium and high.
1. Select the desired Zone. Press the "Mode" button to switch to
"Cool" mode.
2. Use the "Set" up and down arrows to set the desired temperature
for the zone.
3. Press the "Fan" button to switch between Low,High and Auto fan speeds.
• Vent Fans
1. To have just the AC fan operating in a zone, select the desired
Zone, the press the "Mode" button to switch to Fan mode.
2. Press the " Fan" button to switch between Low and High fan
speeds.
• Fan Only Mode
• AC Cooling
To Next Page
Loading...
Need help?
General
