IN-COMMAND NCSP3 User Manual

NCSP3
29
The Schedule function allows you to set a temperature and choose
a start and stop for when you want the HVAC function to operate.
1. Press the "Clock" icon at the bottom right corner of the
HVAC home screen to enter the Schedule page.
• HVAC Schedule
• AUTO GENERATOR START
1. Press the "Generator" icon.
2. Press the "Manual" button to switch to "Auto" and activate
Auto Gen Start.
2. Use the "Set" up and down arrows to set the desired temperature.
3. Use the " Start" and "Stop" arrows to set the time frame that you
want the HVAC function to operate.
4. Choose schedule 1 or 2 on HVAC zone Home Page.

IN-COMMAND NCSP3 Specifications

General

Brand	IN-COMMAND
Model	NCSP3
Category	Measuring Instruments
Language	English