NCSP3
36
7. Press on the white bar next to “Passcode:” and use the device
keypad to enter a passcode for the account, then press the
“Register” button. After the account is registered, a notication
of “Register success” will appear. Press “Dismiss”.
The account & passcode will be pushed to the DC.
9. You can set account & passcode manually.
In Settings, select the Global Connect tab.
10. Enter the account and passcode that you created on the device app.
Press “Login”.
8. On the device, turn Bluetooth off. As long as you have internet
available through your device and iN-Command, the device app
will connect to iN-Command through Global Connect.
To Next Page
Loading...