Indel Webasto Compact Classic - Page 15

WARNING! - Eliminate all sources of re and/or sparks within the unit’s
vicinity; in the event of refrigerant leakage, remove the unit’s electrical plug and
venlate the room thoroughly.
WARNING! - If there is a baery charger, it must be connected to the baery
and never directly to the cooling unit.
WARNING! - If powered with 115-230 V~ mains voltage, the COMPACT
CLASSIC must be connected downstream of a power supply system equipped with
cut-o devices (switches) which permit total disconnecon of the unit current and
protecve devices which automacally intervene in the event of malfuncon.
WARNING! - When connecng the system to the main supply (115 V / 230 V),
verify that the power supply system is equipped with a dierenal circuit breaker for
current leakage.
WARNING! - The electrical plug must be accessible aer installaon. The
appliance must always be enclosed and not accessible without the use of a tool.
The compressor/condensaon unit installaon area must be made with a material
resistant to the needle-ame test required by standard EN 603335---1 or else be
more than 5 cm from electrical and/or electronic components.
WARNING! - Ensure that the compressor is suciently venlated.
WARNING! - Appliances should not be considered toys! Store and use the
product out of reach of children.
User Manual
63