14 Accessories for the Compact Classic
This paragraph lists accessories to make the cooling unit more exible and adaptable
to customer needs:
• Code SEG00030GA:
AC/DC Control unit, mod. 101N0500 – Allows connecon of the product directly
to electrical mains from 115V to 230V 50/60Hz. Both types of power (Vdc and Vac)
can be connected simultaneously; in this case the control unit will give priority to
alternang current. If the alternang current power supply fails, the control unit
automacally switches to DC voltage. The control unit will restart aer one minute
from switching between the two voltages. If alternang current is re-established
there will be no delay in operaon.
Note: The AC/DC control unit is not compable with versions equipped with a
ASU, SEC, DIGITAL DISPLAY system and Secop BD80F compressor.
• Code SEH00004HA:
Power Pack external power supply - Allows connecon of the product directly to
electrical mains from 115V to 230V 50/60Hz. The diode integrated Power Pack
system gives priority to 24Vdc DC voltage coming from the same.
Note: Compable with Secop BD35F and BD50F compressors.
• Code SED00035GA:
Power Pack external power supply - Allows connecon of the product directly to
230V 50/60Hz electrical mains. The diode integrated Power Pack system gives
priority to 24Vdc DC voltage coming from the same.
Note: Compable with BD80F Secop compressors.
• Code SED00035PA:
Power Pack external power supply - Allows connecon of the product directly to
115V 50/60Hz electrical mains. The diode integrated Power Pack system gives
priority to 24Vdc DC voltage coming from the same.
Note: Compable with BD80F Secop compressors.
• Code SBE00004AA:
Forced Venlaon Kit - Allows improved venlaon (forced by means of the fan
already present on the unit, from the outside to the inside) of the cooling unit for
more eecve heat dispersion.
• Code SED00033AA
Smart Energy Control Kit – The SEC (Smart Energy Control) is an accessory applied
User Manual
88
To Next Page
Loading...