Indel Webasto Compact Classic - Low Voltage Protection and Battery Saving

8.2 Low voltage protecon (baery saving)
In order to prevent excessive baery depleon, a protecon device shuts o the
compressor in case of insucient voltage and turns it back on when the voltage in
the system increases aer the baeries have been charged. In the case of no-baery
solar applicaons, inseron of a 220 kΩ resistance is recommended. Standard baery
protecon is congured on the control unit with a resistance with value 0.
If the circuit between pin C and pin P is open, see Table 5.
Table 5: Baery protecon data that can be congured by means of resistance R2 indicated in
the wiring diagram.
Table 6: Standard baery protecon seng oming resistance R2 indicated in the wiring
diagram.
User Manual
81