Most FRIDGE version Compact Cooling Units can be converted into freezer versions
if necessary.
The following factors must be taken into consideraon to perform this conversion:
- The total volume that the unit can cool in the FREEZER version is equivalent to
1/3 of the volume indicated for the FRIDGE version.
- Insulaon thickness must be increased (see the table of insulaon to be
included).
- The thermostat should be replaced with a thermostat kit suitable for the
conversion (contact your local Dealer for assistance).
Warning:
- The purpose and funcon of the Isotherm Compact cooling unit when used
as freezer, is only to keep completely frozen food products frozen while they
are stored in a sealed and properly insulated space. The Isotherm Compact
will not freeze unfrozen or parally frozen food products. Should any unfrozen
or parally frozen food product be stored in the freezer this is considered
to be a misuse and could result in possible unintended thawing of the food
product which may lead to safety issues, sickness or injury if ingested. Storage
of unfrozen or parally frozen food products in the Isotherm Freezer may also
aect the quality of other frozen food products stored within the freezer.
- Exposure to temperatures exceeding the temperature range of the climac
class for which the freezer and its insulaon is made, power supply
interrupons and or frequent opening of the freezer, may also aect the
eecveness of the Isotherm Compact cooling unit and the quality of the
contents of the freezer. The user should always check the quality of the food
products prior to ingeson.
- Misuse or use of the Isotherm Compact cooling unit in any way contrary to
this manual gives rise to no cause of acon against the manufacturer and or
supplier.
User Manual
51