Using Keyrah V3
3.7.3 Global extra Keys
Appended to the Keyboard specific keymap there is an additional row containing the mapping for
features that are always available:
0 1 2 3 4 5 6 7
21 Menu Button Power Key ACPI Sleep Extra Button
• Menu Button: this is an extra button that can be connected to the “Menu Button” jumper
pad. In the default keymaps this is the key that opens the menu/settings and/or disables input
capturing of the supported emulator.
• Power Key: when the power switch is pressed and shortly released after, this keycode will
be produced. In the default keymaps this is always the same keycode as the “Menu Button”
• ACPI Sleep: Sleep Mode to be used when holding the power button switch for longer than 2
seconds. Must contain either 1 (Power Down) or 2 (Put to Sleep mode)
• Extra Button: Button connected to Pin 20 of the C16 connector. This key is always mapped
to ESCAPE in the default keymaps
44
To Next Page
Loading...
