40 INSTINCT User Manual rev 01 04/18
Troubleshooting Section 5
Symptom Possible Cause Action
Overheated unit symbol is
ON, fan does not work
Defective fan or fan control. Only if possible and safe, disconnect the appliance from the power
supply. Contact an authorized service agency. (1)
Overheated unit symbol is
ON
Overheated induction coil;
cooking area is too hot.
Overheated pan. Pan is empty.
Switch the appliance off. Safely remove pan. Wait until the appliance
has cooled down before turning it ON.
Small metallic objects (e.g.
spoon) are heated up in the
cook zone.
Pan detection function is
defective.
Only if possible and safe, disconnect the appliance from the power
supply. Contact an authorized service agency. (1)
(1)
n
DANGER If the plug is not safely accessible, the device must be switched off at the main circuit breaker.
(2) The appliance switches off immediately.
To Next Page
