BOOSTER
WITH LAP-SASH SEAT BELT
To release your child from the restraint simply
press the belt buckle carefully remove your child
from the seat. It is not necessary to release the
red belt clamp, to remove your child
When the restraint is not in use, the seat belt
should be fastened around it and engaged.
Always use lap-sash seat belt and upper anchorage strap to attach the child restraint to
the vehicle.
Do not use the restraint without the upper anchorage strap correctly attached and adjusted.
Do not use on any vehicle seat which faces sideways or rearwards.
IF AN AIRBAG IS FITTED IN THE SEATING POSITION WHERE THE CHILD RESTRAINT
IS TO BE FITTED, FOLLOW THE VEHICLE MANUFACTURER’S WARNINGS AND
INSTRUCTIONS.
Only use this child restraint with the cover supplied or a manufacturer-
Authorised replacement cover with identical shoulder height markers
WARNING
!
VERY IMPORTANT
!
The child restraint cover has been manufactured to meet the Australian Standards requirements
for ammability and toxicity to ensure your child's safety. The cover has also been designed to
provide your child with comfort and support.
24
To Next Page
Loading...
