Inficon Gemini MAG500 - Page 51

tina83e1-d (2018-12) 51
 Carefully slide the measuring chamber cpl. (3) into the
electronics unit (5) until the mechanical stop is reached.
Pins aligned straight.
3
5
4
 Fasten the measuring chamber (3) by means of the
hexagon socket set screw (4).
 MPG5xx gauge only: Perform an ATM and HV adjustment
of the Pirani measuring circuit via the <ADJ> button
(→  40).
A recalibration of the MAG5xx gauge is not
necessary.