Inficon PCG550 - Profibus Connector

34
tina56e1-f (2015-09)
3.2.6 Profibus Connector
If no Profibus cable is available, make one according to the
following diagram. Connect the Profibus cable.
1 5
6 9
D-Sub, 9-pin, male, soldering side
Pin 1, 2 Do not connect Pin 6 VP
2)
Pin 3 RxD/TxD-P Pin 7, 9 Not connected
Pin 4
Pin 5
CNTR-P
1)
DGND
2)
Pin 8
RxD/TxD-N
1)
Only to be connected if an optical link module is used.
2)
Only required as line termination for devices at both ends of bus cable
(
→  [10]).
Profibus cable Sensor cable