Inficon PCG550 - Deinstallation; Explicit Device Address Setting and Deinstallation Procedure

tina56e1-f (2015-09) 55
Explicit Device Address Setting (default 00
hex
)
During device initialization, the device address switches are read
by the device firmware. This device address is supported to the
master as Explicit Device Identification.
2
4
0
6
8
A
E
2
4
0
6
8
A
E
2
4
0
6
8
A
E
The explicit device address is set in hexa-
decimal form (00 … FFF
hex
) via the
<x100>, <x10> and <x1> switches.
Example: Device address = 0xDDD (dec 3549):
0x100 * 0xD (dec 3328) + 0x10 * 0xD (dec 208) + 0x1 * 0xD
(dec 13)
Status LED
LEDs on the gauge inform on the gauge status and the current
EtherCAT status (→  [6]).
5 Deinstallation
WARNING
WARNING: fragile components
The ceramic sensor may be damaged by impacts.
Do not drop the product and prevent shocks and
impacts.