Inficon XL3000flex Short Instructions

INFICON Settings | 5
XL3000flex-short-instruction-jima83en1-02-(1910) 11 / 14
5 Settings
Setting the language
Select the display language. The factory setting is English. (The display on the
handle of the SL3000XL sniffer line shows messages in English instead of in
Russian and Chinese.)
German
English
French
Italian
Spanish
Portuguese
Russian
Chinese
Japanese
Control unit Main Menu > Settings > Setup > Control unit >
Language
LD protocol Command 398
ASCII protocol *CONFig:LANG
Leak rate unit display
Selecting the leak rate unit in the display for vacuum or sniffing
0 mbar l/s (factory setting)
1 Pa m3/s
2 atm cc/s
3 Torr l/s
4 ppm
5 g/a
6 oz/yr
Control unit Main Menu > Display > Units (Display) > Leak Rate Unit SNIF
LD protocol Command 396 (sniffing)
ASCII protocol Command *CONFig:UNIT:SNDisplay

Inficon XL3000flex Specifications

General

Brand	Inficon
Model	XL3000flex
Category	Security Sensors
Language	English