3 | Short instruction INFICON
6 / 14 XL3000flex-short-instruction-jima83en1-02-(1910)
3 Short instruction
Intended use
The XL3000flex is a helium or hydrogen leak detector for sniffing detection. With the
device you locate and quantify leaks on test objects.
A test object always contains gas under overpressure. Check the exterior of the test
objects for escaping gas using a sniffer line (sniffing method).
Only operate the device as described in the operating instructions.
Owner requirements
• Operate the device only as specified in a safety-conscious and hazard-conscious
manner and in compliance with the operating instructions.
• Only use the device when it is technically in good order and condition.
• Meet the following country-specific guidelines and regulations and monitor
compliance.
Operator requirements
• Read, observe and follow the information in the operating instructions and the
working instructions created by the owner, especially the safety instructions and
warnings.
• Carry out any work only based on the complete operating instructions.
• If you have any questions regarding operation or maintenance that you cannot find
answers to in the instructions, please contact INFICON customer service.
To Next Page
Loading...
Need help?
General
