INFICON Safety | 2
XL3000flex-short-instruction-jima83en1-02-(1910) 5 / 14
2 Safety
This quick-start guide does not replace the operating instructions for the leak detector
XL3000flex.
To ensure the safe use of the detector, please also read the operating instructions,
which include further important information. The operating instructions can be found
either on the USB memory stick or on the INFICON website.
The USB memory stick is included in the shipment.
Dangers
The measuring instrument was built according to the state-of-the-art and the
recognized safety regulations.
Nevertheless, improper use may result in risk to life and limb on the part of the user or
third parties, or damage to the unit or other property may occur.
High voltages are inside the device. Touching parts where electrical voltage is present
can result in death.
• Before starting the leak test, disconnect electrically operated test objects from the
power supply. Make sure that the electric power supply cannot reconnected
without authorization.
• Before connecting the device to the power supply, make sure that the supply
voltage specified on the device is the same as the local power supply.
To Next Page
Loading...
Need help?
General
