Board Users Manual 3 of 27 Revision V1.1
2021-09-21
User Manual AURIX™ TCxx4 lite Kit
AURIX™ TCxx4 lite Kit
Safety precautions
Note: Please note the following warnings regarding the hazards associated with development systems.
Table 1 Safety precautions
Caution: The heat sink and device surfaces of the evaluation board may become hot
during testing. Hence, necessary precautions are required while handling the board.
Failure to comply may cause injury.
Caution: The evaluation board contains parts and assemblies sensitive to
electrostatic discharge (ESD). Electrostatic control precautions are required when
installing, testing, servicing or repairing the assembly. Component damage may result
if ESD control procedures are not followed. If you are not familiar with electrostatic
control procedures, refer to the applicable ESD protection handbooks and guidelines.
Caution: The evaluation board is shipped with packing materials that need to be
removed prior to installation. Failure to remove all packing materials that are
unnecessary for system installation may result in overheating or abnormal operating
conditions.
To Next Page
Loading...
