Infineon TLE493D-A2B6 User Manual

3 Soware installation
The following description guides through the installation procedure of the free evaluation soware for the 3D
Magnetic Sensor 2 Go kit.
Steps
1. Download the soware.
Follow the link below to reach the Sensor 2 Go information page on the Infineon website. As shown in
Figure 13, you can find the download link for the latest version of the 3D Magnetic Sensor 2 Go GUI on
the right hand side.
https://www.infineon.com/cms/en/product/promopages/sensors-2go/
Figure 13 Download the "3D Magnetic Sensor 2 Go" soware from the Infineon web
page
2. Start the installation process.
Browse to your download folder and extract the downloaded .zip file. Aerwards, double click on
the .msi file to start the installer. The window in Figure 14 pops up. Click "Next".
3D Magnetic Sensor 2 Go - TLE493D-A2B6
Low Power 3D Hall Sensor with I²C Interface
Soware installation
User Manual 12 1.0
2018-05-16
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

Infineon TLE493D-A2B6 Specifications

General

Brand	Infineon
Model	TLE493D-A2B6
Category	Accessories
Language	English