Infineon TLE987 Series User Manual

5 Communication interfaces
5.1 LIN (via banana jack and uIO BSL)
The integrated LIN transceiver is connected to a banana jack and additionally to the uIO BSL interface. In order
to integrate the device in a LIN network, it is suicient to use the single wire banana interface. The BSL interface
programs the device via LIN. For further information about the uIO interface is available at
www.infineon.com/uio or www.hitex.com/uio.
5.2 Debugging
Debugging is possible via the on-board debugger that can be connected via an USB cable and the SWD
interface; the signals are routed through the 10-pin header SWD interface.
TLE987x EvalBoard
5 Communication interfaces
User Manual 12 v1.0
2020-07-30

Infineon TLE987 Series Specifications

General

Brand	Infineon
Model	TLE987 Series
Category	Motherboard
Language	English